RCBS 11107 .223 Rem/5.56x45mm SB T/C Die Set

RCBS 11107 .223 Rem/5.56x45mm SB T/C Die Set

"The RCBS AR Series die set is a must for any progressive reloader. Each set comes packaged with a full length small base sizing die and a taper crimp seating die. With this combination reloading for an AR-style semi-automatic pump action or lever action rifle just became a lot easier. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. The taper crimp seating die is helpful as it is a bit more forgiving die for crimping cases that have variable case lengths helping to reduce the number of bulges and buckled shoulders when crimping in bullets with a cannelure. Due to the fact that this product sizes more than regular dies it is crucial to have a sufficient amount of high quality lubricant to prevent stuck cases. These dies will also work with any single stage or turret press that will accept 7/8""-14 threaded dies

Type: 2 Die Set
Fits: 223 Remington

Note: Uses Shellholder # #10 (Sold Separately)" }